Xinxiang Hundred Percent Electrical and Mechanical Co.,Ltd
Material Handling Equipment Manufacturer Since 2003
Add to Cart
BEFANABY develops and produces handling equipment, not only can customize standard electric transport carts, but also customize non-standard electric transport carts for handling various molds.
The steel shop floor rail trolley is a rail-type transportation vehicle, which needs to lay a rail on the ground. The rail is generally an I-shaped surface contacting the rails; secondly, it is an electric drive trolley, which runs automatically under the drive of a motor reducer. This kind of transport trolley has a flat surface without a cover, and sometimes it can be non-planar but without a cover. The cart body has no steering wheel, only forward and backward directions (even if it turns, it will turn on the track). This kind of vehicle has the characteristics of simple structure, convenient use, large carrying capacity, no fear of being dirty or smashed, easy to maintain, and long-term use. A means of transport that frequently carries heavy loads over short distances.
Maintenance Attention
1. The air duct of the motor must be unobstructed, and no heat source can be placed around the motor, and preventive measures should be taken in time when problems are found.
2. Under normal conditions, change the grease every six months. When replacing the grease, first wash the bearing with kerosene or gasoline, and then fill two-thirds of the bearing chamber with grease, too much or too little is not good for lubrication.
3. The motor should be inspected regularly, usually a minor inspection every three months, and an overhaul once a year. If the motor winding is burned out due to an accident, it should be disassembled in time to analyze the cause. Usually, the auxiliary winding is burned out due to the failure of starting switching or the capacitor is short-circuited; the main winding is burned out due to long-term overload or stalled starting. Replace the motor winding and remove the cause of the accident before it can be reused.
4. During the use of the electric rail trolley, it is necessary to regularly check the technical status of each component, clean up the dust, water, oil and iron filings that may enter the body in time, and do a good job in the daily maintenance of the electric rail trolley.
| Model | KPX-10t | KPX-16t | KPX-25t | KPX-30t | KPX-40t | KPX-50t | KPX-63t | KPX-80t | KPX-100t | KPX-150t | |
| Rated Load | 10 | 16 | 25 | 30 | 40 | 50 | 63 | 80 | 100 | 150 | |
| Table size | Length(L) | 3600 | 4000 | 4500 | 4500 | 5000 | 5500 | 5600 | 6000 | 6500 | 10000 |
| Width(W) | 2000 | 2000 | 2200 | 2200 | 2500 | 2500 | 2500 | 2600 | 2800 | 3000 | |
| Height(H) | 500 | 550 | 600 | 600 | 650 | 650 | 700 | 800 | 900 | 1200 | |
| Wheel Base | 2600 | 2800 | 3200 | 3200 | 3800 | 4200 | 4300 | 4700 | 4900 | 7000 | |
| Rail Inner Gauage | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1800 | 2000 | 2000 | |
| Wheel Diameter | 300 | 350 | 400 | 400 | 500 | 500 | 600 | 600 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance | 50 | 50 | 50 | 50 | 50 | 50 | 75 | 75 | 75 | 75 | |
| Running Speed | 25 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 18 | |
| Motor Power | 2 | 2.2 | 3.5 | 4 | 5 | 6.3 | 8 | 10 | 15 | 15 | |
| Battery Capacity | 160 | 180 | 250 | 250 | 300 | 330 | 400 | 400 | 440 | 600 | |
| Battery Voltage | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 72 | 72 | 72 | |
| Max Wheel Load | 42.6 | 64.5 | 94.5 | 110.4 | 142.8 | 174 | 221.4 | 278.4 | 343.8 | 265.2 | |
| Reference Weight | 4.2 | 5.5 | 6.5 | 6.8 | 7.6 | 8 | 10.8 | 12.8 | 14.6 | 26.8 | |
All can be customized as per customers’ requirement.And BEFANBY business is meeting your business need, hope our professional team can help you well with rich experience.
battery powered transfer cart rail power supply trolley line motorized rail cart cable power supply